Tulip Diagnostics analyzer integration
SamLab ships driver profiles for 3 Tulip Diagnostics models across hematology, connecting over TCP/HL7. Finished results reach result entry matched to the sample by barcode — nothing is typed twice.
Supported Tulip Diagnostics models
Every model below has a driver profile in the current SamLab build. If yours is a variant not listed, it very likely speaks the same protocol as its family — ask us and we will confirm it on a live connection.
- CounCell 23 Excel
- CounCell 23 Plus
- CounCell Penta 2.0
How a Tulip Diagnostics analyzer connects
TCP/HL7
The analyzer sends HL7 result messages over the lab network to SamLab’s listener. Set the SamLab PC’s IP and port in the analyzer’s LIS settings.
The link is one-way: the instrument sends results and SamLab receives them. SamLab does not send the worklist back to the analyzer, so nothing here can change what the machine runs.
Common questions
- Is my Tulip Diagnostics model supported?
- If it appears in the list above, yes — the profile ships in the app. If it does not, tell us the exact model; most additions are a new profile rather than new code.
- Which cable or network setting do I need?
- It depends on the model: TCP/HL7. The analyzer’s own LIS or “host” settings screen names the protocol it uses, and the matching section above says what SamLab expects.
- Does it need internet?
- No. The analyzer and the SamLab PC talk over a cable or the local network, so results keep arriving through an internet outage.
Try the whole lab, free for 7 days.
No card. No catch. Run SamLab on your own data — online or offline — and feel the difference before you pay a rupee.